Knowledge BaseHOME/SERVICE & SUPPORT/KNOWLEDGE BASE
Printing from P1 and ATS-1
Created 11 Jul 2008
Several third party manufacturers sell Parallel to USB adapters for converting the data sent from a parallel port to USB. The AP Tech Support Department recently tested three different USB printers with current and discontinued models of the Portable One and ATS-1 using an “Lpt2USB Parallel To USB Printer Adapter” (Item#122 0202, CyberGuys.com, $79.99). |
 The Lpt2USB adapter |
Please note these findings apply only to the test setup described below. We cannot guarantee the results of your particular printer or Parallel to USB adapter.
Test summary
- Current model P1s and ATS-1s printed successfully.
- Older models (the discontinued original P1 & ATS-1, and P1 Plus) were not compatible with the Lpt2USB adapter and were unable to print.
Table of test results
AP Instrument |
Result |
Production status |
P1 Access |
Print OK |
In production |
P1 DD |
Print OK |
In production |
ATS1 Access |
Print OK |
In production |
ATS1 DD |
Print OK |
In production |
P1 |
Print Failed |
Discontinued September 1995 |
ATS1 |
Print Failed |
Discontinued September 1998 |
P1 Plus |
Print Failed |
Discontinued March 1999 |
Printers Tested
- HP Business Inkjet 2300
- Ricoh Laser AP610N
- HP Deskjet 825c
Notes:
- The Deskjet 825c indicated an error condition, but the print was OK. No errors were reported by the other printers.
- Printer must be PCL Compatible (HP's Printer Command Language).
- Instrument must be set to PCL Print Mode.
- AP does not support third party applications or products unless specifically stated.
Return to Knowledge Base home
Comments
0 comments so farPlease log in to add a comment.
